Guide – RTC Alarm Configuration-FMP12-N3160 Bios Setting

RTC Alarm, Real-time clock alarm, is a feature that can be used to allow a computer to ‘wake up’ after shut down to execute tasks every day or on a certain day. It can sometimes be found in the ‘Power Management’ section of a motherboard’s BIOS setup. However, most mini pc don’t have this function, instead only wake on power function. Now a very good news, HYSTOU new released mini pc FMP12-N3160 support wake up by RTC alarm, here is the guide of bios setting for this function.

RTC Alarm, Real-time clock alarm, is a feature that can be used to allow a computer to ‘wake up’ after shut down to execute tasks every day or on a certain day. It can sometimes be found in the ‘Power Management’ section of a motherboard’s BIOS setup. However, most mini pc don’t have this function, instead only wake on power function. Now a very good news, HYSTOU new released mini pc FMP12-N3160 support wake up by RTC alarm, here is the guide of bios setting for this function.

 

Step 1. Turn on the PC by press the On/Off switch

0517-00

Step 2. Press “DEL” key on keyboard before the PC went into Windows and going to BIOS. Select “Systeme Power Management” using the arrow key on keyboard, press “Enter” to go wake on RTC alarm setting.

0517-01

Step 3. Change setting of “Wake sytem from S5″ to [Fixed Time]; change ” Wake up day of month” to the month you want, “0” stand for every month; set exact hour you want for “Wake up hour”; set exact minute you want for “Wake up minute”; set exact second you want for “Wake up second”. Press F4 to save setting and exit bios.

0517-02

Now once you turn off the mini pc, it will auto power on at the time you’ve just set.

Leave a Reply

Your email address will not be published. Required fields are marked *