《H6》How about installing a Linux like system that displays abnormalities or does not display?

Overview: H6 models are designed with 3 display ports (HDMI1, HDMI2, DP), of which HDMI2 is the default built-in output port, relying on the built-in EDP chip output. Therefore, when installing linux system, if you use other ports instead of HDMI2,... Read More | Share it now!

Prompt Reboot and Select proper boot device troubleshooting steps

Description of the problem: When the computer appears "Reboot and Select proper Boot device" prompt can not enter the operating system, how to solve? According to the tutorial one by one troubleshooting can usually be solved. The following figure... Read More | Share it now!

Guide: Bios Setting for H2-i3-7100U Mini PC Autostart after a Power Loss

H2-i3-7100U Mini PC details: Follow the guide to set your computer to automatically turn on after a power failure. Setp 1: Press On/Off Switch on the pc and then keep press “Delete”until goes into bios, and then using directiion key to go to... Read More | Share it now!

Guide - RTC Alarm Configuration-FMP12-N3160 Bios Setting

The RTC Alarm feature can be used to "wake up" the computer in real time after powering down. This feature can sometimes be found in the "Power Management" section of the motherboard's BIOS setup. Below is the BIOS setup guide for this feature. Step... Read More | Share it now!